SoftBank 940SC, User Manual

Page: 88 / 338

Calling
3-19
3
Talking with All Parties
a
While connected with multiple
parties, tap Group call func
→
Change to group call
・
To talk with one party again, tap Group call
func
→
Change to private call
→
.
・
To end all calls, tap Group call func
→
Select
End
all calls
.
・
When one party ends the call during Conference
Call, continue talking with remaining parties.
Advanced
br P.3-24
●
Ending Selected Call
Call Barring
Bar outgoing/incoming Voice Calls, Video Calls or
SMS by conditions listed below.
Item Description
Outgoing call
Bar all outgoing
calls
Disables calling or
sending SMS to all but
emergency numbers.
Bar all international
calls
Disables outgoing
international calls and
SMS.
Bar international
calls
Disables calling or
sending SMS to numbers
outside of Japan and the
country where you are.
Incoming call
Bar all incoming
calls Blocks all incoming calls
and SMS.
Bar all roaming
calls
Blocks all incoming
international calls and
SMS.
・
Setting Call Barring requires Network Password
(four-digit number specified at subscription).
Network Password can be changed ( f P.3-20).
・
If a call is placed while Call Barring is active, a
message appears indicating that Call Barring is
active. The message may appear after a while
depending on service area.
Note
・
If incorrect Network Password is entered
three consecutive times, Call Barring is
disabled . In this case, change Network
Password and Center Access Code . For
details, contact SoftBank Mobile Customer
Center, General Information (
f
P .15-27) .
・
If Call Forwarding or Voicemail is active,
Bar all outgoing calls
and
Bar All
incoming calls
cannot be set (Optional
Services override Call Barring settings) .