SoftBank 009SH Y, User Manual

Page: 72 / 110

70
Connecting Paired Handsfree Devices,
Etc.
In Home Screen, 端末設定 Wireless &
networks
Bluetooth settings
Bluetooth settings opens.
Tap device
The device is connected.
Accepting Connection Requests
Handset automatically accepts connection requests from
paired devices. For unpaired devices, enable Discoverable
(
) first; when connection request arrives, follow
onscreen prompt.
Bluetooth
®
Connection Operations
Unpairing Devices
In Bluetooth settings, Long Touch device Unpair (or
Disconnect & unpair )
Disconnecting Handsfree Devices, Etc.
In Bluetooth settings, tap device OK
Allowing Other Devices to Detect Handset
In Bluetooth settings, Discoverable ( )
・Discoverable is effective for 120 seconds, then turns off
automatically.
Accepting Connection Requests while Connected
to a Device
In Bluetooth settings, Detailed Bluetooth Settings
Multiple connect standby ON
Receiving Files (e.g., Address Book via All File
Transfer)
When file reception request arrives, appears on Status
Bar. Follow these steps to receive files:
In Home Screen, etc., tap Status Bar Tap notification
Accept After receiving files, tap Status Bar
Tap notification Tap file (.vcf) Register of data
Enter Handset Code OK Tap option
・If confirmation appears, follow onscreen instructions.
・Received files are saved to SD Card; open them from
Contents Manager.
Sending Single Files (e.g., Address Book)
In Home Screen, In application list, (Address
Book) Long Touch contact Send by Bluetooth
Yes Tap device
・If an image is set for selected contact, image transfer
confirmation appears.
Sending Selected Files (e.g., Address Book)
In Home Screen, In application list, (Address
Book) Send by Bluetooth Select and
send Tap contacts ( ) Send Yes
Tap device
・If a contact with image is included, image transfer
confirmation appears.