EN
35
PROBLEM
POSSIBLE CAUSE
RESOLUTION
Display does not
light up
Batteries are empty
Replace batteries
Batteries are not
inserted correctly.
Insert batteries correctly.
The DC adapter is not
inserted correctly.
Insert the DC adapter correctly.
Display is difficult to
see or slow
Battery charge is
too low.
Replace batteries
E 01 is displayed
The cuff is too tight or
too loose.
Reposition cuff and repeat measurement
E 02 is displayed
The blood pressure
monitor displays
movement during the
measurement.
Movements may affect the measurement.
Relax for a moment and repeat the
measurement.
E 03 is displayed
No pulse was detected
during measurement.
Remove the clothing from your arm and
repeat the measurement.
E 04 is displayed
A precise measurement
could not be performed.
Relax for a moment and repeat the
measurement.
EExx is displayed.
A “calibration error” oc-
curred. (XX can indicate
a digital signal, e.g. 01,
02 etc.)
Repeat the measurement. If the problem
occurs again please contact your seller or our
customer service for further assistance.
is
displayed
Low battery charge
The charge status of the battery is too low;
batteries must be replaced.
“Out” is displayed
Outside of the measure-
ment range
Relax for a moment. Reposition the cuff and
repeat the measurement. If the problem
occurs again please contact your doctor.
TROUBLESHOOTING
Summary of Contents for SYSTO MONITOR 300
Page 3: ...2 3cm 1 2 3 4 AA Alkaline...
