MAN_Furia_GB_01
20
01/2019
MAN_Furia_GB_01
Manuel d'entretien et d'utilisation
user maintenance guide
5.2.5 - Quick adjustment of caster/camber pill
1
● Remove the 2 screws.
2
● Unlock axle of the front stub.
3
● Rotate the 2 caster/camber pills tu adjust the caster or
camber angle.
Adjustment
Caster angle : Top caster/camber pill
Camber angle : Low caster/camber pill
5.2.6 - Front wheel alignment
A
A = B
B
1
2
2
1
1
3
5
4
Legend
1 Wheel alignment disk
2 Tie rod nut and lock nut
3 Steering wheel in straight position
4 Maximum steering angle position
5 Steering wheel fully turned position
● Place the kart on a trolley.
● Place the front wheel alignment disk (1)
(available on ITAKA web site).
● Unscrew the lock nuts (2) of the 2 tie rods.
Warning
: lock nut of tie rod side is a right hand thread;
lock nut of steering column side is left-hand thread.
● Position the upper branch of the steering wheel in the kart
axle.
● Measure A and B with a roll meter. Adjust the tie rods until
you get A=B with a tie rod length on the right side 1.5mm
bigger than the tie rod length on the left side.