MAN_Furia_GB_01
21
MAN_Furia_GB_01
01/2019
Manuel d'entretien et d'utilisation
user maintenance guide
C
● Turn the steering wheel to put stub axle in position (4),
measure the dimension C.
● Turn the wheels in the opposite direction and measure the
dimension C for the second wheel.
● The two dimensions C must be equal.
Recommended setting on a dry track
● 2 mm opening : B = A +2mm.
●
Make sure the dimensions C are equal on each
side.
Recommended setting on a wet track
● 7 mm opening : B = A +7mm.
●
Make sure the dimensions C are equal on each
side.
● Remove the front wheel alignment disk (1).
●
Do not forget to tighten the 2 lock nuts on the
tie rods; otherwise the parallelism will be lost
in a few minutes.
●
Any time you work on the front wheels, check
the parallelism. Do the same after shocks
►
Never drive with badly tightened wheels: it
may lead to severe, even fatal injuries.
►
Make sure that each ball joint penetrates at
least 5 threads in the tie rods.
5.2.7 - Adjustment of tie rods
1 2
B
A
3 4
● Standard adjustment : A 2.
