9
English
ASSEMBLING THE SPARKLING BEVERAGE MAKER
USING THE SPARKLING BEVERAGE MAKER
Making spar_kling water_
2
To insert bottle, make sure that the
carbonation lever is in its fully upward
position and the bottle loading lever is
angled forward. If not angled forward,
pull it toward you until it clicks. Do not
pull carbonating tube.
1
Rinse the carbonating bottle before
use. Prior to making sparkling water,
fill bottle with water up to the fill
line. For best results, carbonate chilled
water. To avoid product damage,
carbonate water only.
1
2
3
Insert bottle neck into the snap-lock. Firmly
push bottle up and back. The snap-lock
mechanism will catch the bottle firmly.
4
Carbonate in short pulses by pulling the
carbonation lever down firmly and then
allowing the lever to return to a middle rest
position before repeating. Continue until
the desired level of carbonation is achieved.
Do not move the Sparkling Beverage Maker
during the carbonation process.
WARNING: Do not remove the bottle until after you hear the sound of excess
CO
2
finish discharging.
6
Pull bottle toward you to release bottle
from snap-lock; the bottle will be released
automatically.
5
To release bottle, push Carbonation lever to
its fully upward position. You will hear the
sound of excess CO
2
discharge.
WARNING: Do not carbonate an empty bottle.
W10790834A_EN-Final.indd 9
6/8/15 4:43 PM