socomec Masterys BC, Installation And Operating Manual

Page: 34 / 52

34
MASTERYS BC
100-120 kVA - Ref.: IOMMASBCXX07-EN 05
5. HUMAN MACHINE INTERFACE
5.3.6. BATTERY SETTINGS MENU
This is the menu for battery confi guration. The list can be scrolled down to see the full list of battery settings. If batteries are not
available only the fi rst element of the list is shown. When one of the battery settings is edited all settings below in the list have to
be checked and confi rmed. The battery settings are saved only when the last battery setting is confi rmed.
To change battery confi gurations enter the menu: MAIN MENU > SETTINGS > UPS SETTINGS > BATTERIES .
In the case of UPSs connected in parallel enter the menu: UNIT MENU > BATTERY SETTINGS .
These parameters for battery settings are critical: number of cells, capacity, charge current.
Risk of damage for load or batteries.
5.3.7. HISTORY LOG menu
EVENT LIST menu: it shows the list of UPS alarms and events that have occurred. The last 150 events can be displayed. Press
UP/DOWN to scroll the list.
STATISTICS menu: the system reports some measurements (output load, input apparent power, internal temperature) in graphi-
cal format. These values can be used to analyse the situation over the last 14 days or in shorter periods (last 24 hours, last hour or
last minute). Enter the required menu and press
UP/DOWN to scroll through diff erent periods. The last page shows the minimum,
maximum and average values of the selected measurement. This information provides an enhanced evaluation of the operating
mode of the equipment in order to verify whether certain critical operating situations are recurrent or only occasional.
COUNTERS menu: provides the number of events (occurred in the last 14 days) of switches on battery, overloads and the num-
ber of working hours on genset.
5.3.8. SERVICE menu
This menu is reserved for support service personnel and holds the UPS identifi cation data, the utilities for the SW upgrade, and
the utilities for the download of reports to an USB key.
5.3.9. COMMISSIONING CODE
To complete equipment activation a warranty activation code is requested. To insert the Commissioning Code go to MAIN MENU
> SERVICE > COMMISSIONING CODE .
If the Commissioning Code is not inserted an alarm symbol is shown on the mimic panel ( ).
The Commissioning Code is provided directly by the reference Support Centre upon communication of the serial number. When
contact is made with the Support Centre for the Commissioning Code , detailed information can be obtained on the UPS func-
tions available and on regular preventive maintenance programmes.
5.3.10. BATTERY SETTINGS MENU
This is the menu for battery confi guration. The list can be scrolled down to see the full list of battery settings. If batteries are not
available only the fi rst element of the list is shown. When one of the battery settings is edited all settings below in the list have to
be checked and confi rmed. The battery settings are saved only when the last battery setting is confi rmed.
To change battery confi gurations enter the menu: MAIN MENU > SETTINGS > UPS SETTINGS > BATTERIES .
In the case of UPSs connected in parallel enter the menu: UNIT MENU > BATTERY SETTINGS .
These parameters for battery settings are critical: number of cells, capacity, charge current.
Risk of damage for load or batteries.