background image

5

SOCOMEC - Réf. : 874 669 A GB

RS232 <=> RTC<=> RS485

Modem

APPROVALS AND CONFORMITY

Type

Approval / Compliance

EMC

EN 61000-6-2, Immunity industrial environments

EN 55024, Immunity IT equipment

EN 61000-6-3, Emission residential environments

FCC part 15 Class B

EN 50121-4, Railway signalling and telecommunications apparatus

IEC 62236-4, Railway signalling and telecommunications apparatus

Safety

EN 60950-1, IT equipment

UL recognised, UL 60950-1

CSA 22.2 No 60950-1-03

PSTN

CS 03

FCC part 68

ETSI TS103 021-1, ETSI TS103 021-2, ETSI TS103 021-3

ACA TS001, AS / ACIF S002, AS / ACIF S006

FCC Part 15.105 Notice

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful inter-
ference in a residential installation.

This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.

However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• reorient or relocate the receiving antenna,

• increase the separation between the equipment and

receiver,

• connect the equipment into an outlet on a circuit

different from that to which the receiver is connected,

• consult the dealer or an experienced radio / TV techni-

cian for help.

Summary of Contents for 4899 0200





















Reviews: