SOCO MC-275F, Operation Instructions Manual

Page: 13 / 14

13
(1) Push the turning table fixing handle leftward.
(2) Turn the turning table to the required angle.
(3) Push the fixing handle rightward.
5.2 Steps of Operation
(1) Prepare the machine as states in Section 5.1.
(2) Put a work piece into vise.
(3) Turn the vise hand wheel clockwise to clamp the work piece.
(5) Pull down the handle and press trigger switch.
(6) The saw blade starts rotating. The coolant starts flowing out of nozzle.
(7) Continue to pull down the handle until the saw blade cuts off the work piece.
(8) Release the trigger switch and let the saw head moves up slowly.
(9) Turn the vise hand wheel 1/2 (half) turn counter-clockwise to release the work piece.
Repeat step (2) through (9) to finish the job.
NOTE: Release the trigger switch immediately if any malfunction or abnormal
situation happens.
5.3 Daily Inspection and Maintenance
5.3.1 Gear Box of Cutting Head
(1) Change gear oil (SAE 140) every six months.
(2) Check temperature of the gearbox during continuous operation.
5.3.2 Chip Collecting Tray
Remove chip from collecting tray everyday.
6. ELECTRICAL SYSTEM DIAGRAM