SOCO MC-275F, Operation Instructions Manual

Page: 8 / 14

8
3. INSTRUCTION OF INSTALLATION
Note: Please read the instruction carefully before installation.
If having any question please contact your dealer for prompt service.
3.1 Unpacking and Inspection
(1) Check if there is any damage on the wooden case or the plastic bag that used to pack
the machine. Should any damage be found on the machine, please claim for the
damage against the delivery or insurance company.
(2) Check the machine and accessories against the packing list. Should any shortage,
please contact your dealer.
3.2 Lifting, Moving and Anchoring
(1) Lifting eyebolts have been mounted on the machine. Please use hoist and sling
devices with enough capacity to lift and move the machine.
(2) Slots, designed at the bottom of the machine, can be used by forklift to move the
machine.
(3) Please watch over the obstacle or personnel that may be on the way of moving the
machine.
(4) Place the machine on a horizontal foundation. Use anchor bolt and nut to fix the
machine.
3.3 Connecting Electric Power
Note:
(1) Assure the main power switch is at “OFF” position and the saw blade motor
speed select switch is at “OFF” position before connecting the machine to
electric power source
(2) Do not install saw blade on the main shaft when checking the rotational
direction of the main shaft.
(1) Only qualified electrician can connect electric power.
(2) The voltage, amperage and protection capacity of the power source shall meet the
requirement of the machine.