3
SCANNER SETUP
Insert the Batteries:
Unlock the battery cover by using a screwdriver
or coin to turn the lock under the CHS to a
horizontal position. Remove the cover.
Install the batteries in their correct position as
indicated by the +/- symbols. You may also want
to attach the tether (see below). Replace the
battery cover and turn the lock to a vertical
position.
IMPORTANT! Only use NiMH batteries.
Attach the Tether
(Optional)
:
After removing the battery cover,
wrap the string loop of the tether
around the inside part of the lock.
Replace the battery cover and lock
it by turning the lock into a
vertical position. If desired, attach
the tether to a lanyard or belt.
Charge the CHS:
The CHS must be fully charged before first use.
Initial charging takes about 5 hours. For the 7P,
lift the rubber flap to access the power
connector.
•
Red LED = Charging
•
Green LED = Fully charged
Besides the included AC adapter and USB to DC
plug cable, Socket offers optional charging
cradles (sold separately).
•
Cradle for CHS 7M: SKU# AC4054-1381
•
Cradle for CHS 7P: SKU# AC4055-1382
http://ww1.socketmobile.com/products/bluetoot
h-scanners/accessories-bt.aspx
STYLUS TIP
Built-in Touch Screen Stylus:
Use on Pocket PC / other resistive device touch screens.
Do not use a damaged stylus, as it may scratch the screen.
Do not use on iPad, iPhone, iPod touch or other capacitive
screen devices.