5
SS0023V2
5. Maintenance and Service
If required, clean with a damp cloth and mild detergent. Do not use abrasives
or solvents.
There are no user-serviceable parts. Contact Socket and See for service and
technical assistance:
Socket and See
Century Road
High Carr Business Park
Newcastle
Staffordshire, UK
ST5 7UG
Tel: 01782 567096
Fax: 01782 567095
Email: [email protected]
Website: www.socketandsee.co.uk
Red LED
Flashes with an intermittent audible tone to
indicate correct operation and scanning function.
Continuously illuminated with a continuous tone to
indicate a voltage of over 50VAC is present.
Probe Tip
GS38 Compliant
Safety Barrier
Fingers must be behind
this barrier at all times.
Test Button
Press and release to power on. The red
LED will blink with an audible bleep to
indicate correct operation.
Hold for over on second to power off.
While in operation press and release to
reset the memory.
