10
Connect the Poles
1. Connect the poles by inserting the upper pole assembly
into the lower pole assembly (Fig. 5).
2. Screw the pole collar on the thread to secure the poles
(Fig. 6).
Fitting the Safety Guard
m
WARNING!
The safety guard must be properly installed.
The safety guard provides partial protection from the risk of
thrown objects to the operator and other bystanders.
1. Fit the safety guard in the groove on the motor housing,
as shown (Fig. 7).
2. Hold the blade hub in place, use the safety guard screw to
fix the safety guard in place, as shown (Fig. 8).
Operation
The cordless grass trimmer is designed to cut grass and
weeds under bushes, and on slopes that cannot be reached
with the lawn mower. The trimmer must be used outdoors
only, at an ambient temperature between 41ºF (5ºC) and 113ºF
(45ºC).
m
WARNING!
Remove stones, small sticks and other
objects from the cutting area. The nylon blade will continue
to rotate for a few seconds after the trimmer is switched off.
Let the motor come to a complete stop before switching the
trimmer back on. Do not rapidly switch the trimmer off and on.
m
WARNING!
Rocks or debris may ricochet or be thrown
into eyes and face, cause blindness, or other serious injury.
Never lean over the trimmer head and always wear eye
protection.
Fig. 5
Upper pole
assembly
Pole collar
Lower pole
assembly
Pole collar
Fig. 6
Safety guard
Fig. 7
Groove
Safety guard
Fig. 8
Safety guard
screw
