background image

Charging the Battery

1.  Press the push lock buttons on the battery to pull it out of 

the equipment (Fig. 1).

2.  Depending on your Snow Joe

®

 + Sun Joe

®

 charger 

model, how to recharge your lithium-ion battery will 

vary. You may either insert your 24-volt battery into the 

24VCHRG-QC Quick Charger (sold separately) or the 

24VCHRG-DPC Dual Port Charger (sold separately) 

 

(Figs. 2 – 3).

3.  The battery indicator LEDs will illuminate one by one 

during the charging process. Unplug the charger 

immediately when the 3 LEDs are all illuminated.

4. 

The 24VCHRG-QC Quick Charger (sold separately) and 

the 24VCHRG-DPC Dual Port Charger (sold separately) 

are also equipped with additional charging indicating 

lights which will indicate the charging status (Figs. 2 – 3). 

m

CAUTION!

 FIRE HAZARD. When disconnecting the 

charger from the battery, be sure to unplug the charger from 

the outlet first, then disconnect the charger from the battery. 

m

WARNING!

 

This charger does not automatically 

turn off when the battery is fully charged. 

Please take care 

not to leave the battery plugged into the charger. Switch 

off or unplug the charger at the mains when charging is 

complete.

5.  Timely recharging of the battery will help prolong the 

battery's life. You must recharge the battery pack when 

you notice a drop in the equipment's power.

IMPORTANT! Never allow the battery pack to become fully 

discharged as this will cause irreversible damage to the 

battery. 

6.  When charging is complete, remove the battery from the 

charger by pulling the push lock buttons and sliding the 

battery backward to unlock it from the charger.

Preparing To Work

Checking the Machine

m

WARNING! 

Before performing any checks, 

adjustments, repairs or maintenance on the machine, make 

sure the battery is not inserted in the compartment.

Before starting work please:

•  Check that all the screws on the machine and the guide 

bar are tightly fastened;

Battery pack

Fig. 1

Battery compartment

Fig. 2

Battery pack

24VCHRG-QC

 

quick charger 

 

(Sold separately) 

red

Charging

green

Fully 

Charged

Fig. 3

Battery pack

24VCHRG-DPC 

 

dual port charger 

(Sold separately)

red

Charging

green

Fully 

Charged

10

Summary of Contents for Sunjoe 24V-10CS

























Reviews: