background image

5

Battery & Charger 

 

Safety Instructions

NOTE: This unit is tool only. The battery and the charger are 

not included. They must be purchased separately.

Model 24V-10CS-CT-RM is compatible with the iON+ 24V 

System batteries and chargers. See page 22 for more 

information.
We pay a great deal of attention to the design of every battery 

pack to ensure that we supply you with batteries that are safe, 

durable and have a high energy density. The battery cells have 

a wide range of safety devices. Each individual cell is initially 

formatted and its electrical characteristic curves are recorded. 

This data is then used exclusively to be able to assemble the 

best possible battery packs.
Despite all the safety precautions, caution must always be 

exercised when handling batteries. The following points must 

be obeyed at all times to ensure safe use. Safe use can only 

be guaranteed if undamaged cells are used. Incorrect handling 

of the battery pack can cause cell damage.
IMPORTANT!

 Analyses confirm that incorrect use and poor 

care of high-performance batteries are the main factors 

responsible for personal and/or product damage.

m

WARNING!

 

Use only approved replacement batteries; 

other batteries may damage the cordless chain saw and cause 

it to malfunction, which can lead to serious personal injury.

m

WARNING!

 Do not use a battery pack or appliance that 

is damaged or modified. Damaged or modified batteries may 

exhibit unpredictable behavior resulting in fire, explosion or 

risk of injury.
Do not modify or attempt to repair the appliance or the battery 

pack except as indicated in the instructions for use and care.

Have your battery pack serviced by a qualified repair person

using only identical replacement parts. This will ensure that the

safety of the battery pack is maintained.

m

CAUTION!

 To reduce the risk of injury, charge the 24V 

iON+ lithium-ion battery pack only in its designated 24V iON+ 

lithium-ion charger. Other types of chargers present

risk of fire, personal injury and damage. Do not wire a battery

pack to a power supply plug or car cigarette lighter. Such

misuse will permanently disable or damage the battery pack.

•  Avoid dangerous environments –

 Do not charge the 

battery pack in rain, snow or in damp or wet locations. 

Do not use the battery pack or charger in the presence of 

explosive atmospheres (gaseous fumes, dust or flammable 

materials) because sparks may be generated when inserting 

or removing the battery pack, which could lead to a fire.

•  Charge in a well-ventilated area – 

Do not block the 

charger vents. Keep them clear to allow for proper 

ventilation. Do not allow smoking or open flames near a 

charging battery pack. Vented gases may explode.

  NOTE: The safe temperature range for the battery is  

41°F – 105ºF (5°C – 40.5°C). Do not charge the battery 

outside in freezing weather; charge it at room temperature.

•  Maintain charger cord –

 When unplugging the charger, pull 

the plug, not the cord, from the receptacle to reduce the 

risk of damage to the electrical plug and cord. Never carry 

the charger by its cord or yank it by the cord to disconnect 

it from the receptacle. Keep the cord away from heat, oil 

and sharp edges. Make sure the cord will not be stepped 

on, tripped over or subjected to damage or stress when the 

charger is in use. Do not use the charger with a damaged 

cord or plug. Replace a damaged charger immediately.

•  Do not use an extension cord unless it is absolutely 

necessary – 

Using the wrong, damaged or improperly 

wired extension cord poses a risk of fire and electric shock. 

If an extension cord must be used, plug the charger into a 

properly wired 16 gauge or larger extension cord with the 

female plug matching the male plug on the charger. Make 

sure that the extension cord is in good electrical condition.

• 

Use only recommended attachments –

 Use of an 

attachment not recommended or sold by the battery 

charger or battery pack manufacturer may result in risk of 

fire, electric shock or personal injury.

•  Unplug charger when not in use –

 Make sure to 

disconnect battery pack from unplugged charger.

m

WARNING! 

To reduce the risk of electric shock, 

always unplug the charger before performing any cleaning or 

maintenance. Do not allow water to flow into the charger. 

 

Use a Ground Fault Circuit Interrupter (GFCI) to reduce 

 

shock hazards.

•  Do not burn or incinerate the battery pack –

 The battery  

pack may explode, causing personal injury or damage. 

Toxic fumes and materials are created when battery pack is 

burned.

•  Do not crush, drop or damage battery pack – 

Do not use 

the battery pack or charger if they have sustained a sharp 

blow, been dropped, run over or have been damaged in any 

way (i.e. pierced with a nail, hit with a hammer, stepped on, 

etc.).

•  Do not disassemble – 

Incorrect reassembly may pose 

a serious risk of electric shock, fire or exposure to toxic 

battery chemicals. If the battery or charger are damaged, 

contact an authorized Snow Joe

®

 + Sun Joe

®

 dealer or 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563) for assistance.

•  Battery chemicals cause serious burns – 

Never let a 

damaged battery pack contact the skin, eyes or mouth. If a 

damaged battery pack leaks battery chemicals, use rubber 

or neoprene gloves to safely dispose of it. If skin is exposed 

to battery fluids, wash the affected area with soap and 

water and rinse with vinegar. If eyes are exposed to battery 

chemicals, immediately flush with water for 

 

20 minutes and seek medical attention. Remove and 

Summary of Contents for Sunjoe 24V-10CS-CT-RM





























Reviews: