background image

© 2016 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

A Division of Snow Joe

®

, LLC

Model 20ViON-CS10 

Form No. SJ-20ViON-CS10-880E-M

OPERATOR’S MANUAL

SAVE THESE INSTRUCTIONS

20-VOLT 10-INCH  
CORDLESS CHAIN SAW

Let Gravity Do The Work

TM

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Read all the instructions contained in this manual. Keep this 

manual in a safe place, so that the information is available at 

all times. If you give the equipment to another person, make 

sure to provide these operating instructions. Basic safety 

precautions should always be followed to reduce the risk of 

fire, electric shock, and personal injury. 

m

DANGER! 

This indicates a hazardous situation, which,   

if not followed, will result in serious injury or death.

m

WARNING! 

This indicates a hazardous situation, which, 

if not avoided, could result in serious injury or death.

m

CAUTION! 

This indicates a hazardous situation, which, 

if not avoided, could result in minor or moderate injury.

Intended Use

This cordless chain saw was designed and manufactured for 

trimming and pruning tree limbs and branches and for cutting 

smaller logs up to recommended 7.9 inch (20 cm),

 

not to 

exceed a max cut of 9.5 in. (24 cm) in diameter depending on 

type of wood. All of the wooden objects intended to be cut 

with this chain saw should be no thicker than the guide bar's 

maximum cutting capabilities.

Improper Use

Any other use differing from the above mentioned applications 

poses a serious hazard to the user and may damage both the 

tool and your personal property. Examples of improper use 

include, but are not limited to:

•  Trimming hedges;
•  Carving;
•  Sectioning pallets, crates, and various packing materials;
•  Sectioning furniture or other materials with nails, screws, or 

other metal components;

•  Butchering meat;
•  Using the machine to lift, move, or split objects;
•  Using the machine while fastened to fixed supports.

Improper use of the machine will invalidate the warranty, 

relieve the manufacturer from all liabilities. The user will 

consequently be liable for all and any damage or injury to 

himself/herself or others.

General Safety 

m

WARNING!

 

When using electric/cordless yard tools, 

basic safety precautions should always be followed to reduce 

the risk of fire, electric shock, and personal injury, including the 

following:

1. Keep guards in place – Protective guards should be 

checked periodically to ensure they are properly fitted and 

in correct working order.

2. Remove adjusting keys and wrenches – 

Check that 

adjusting wrenches are removed from the saw before 

turning it on.

3. Keep work area clean and well-lit – 

Clear work area of 

branches and limbs after each cutting session. Cluttered 

areas invite accidents.

4.  Do not use in dangerous environments – Do not use 

power tools in damp or wet locations.

5.  Do not use the chain saw in the rain.
6.  Keep bystanders and children away – 
All bystanders, 

including children and pets, should be kept a safe 

distance away from the work area.

7.  Do not force the tool – 

It will do the job effectively and 

safely if it is used at the rate for which it was designed. 

8.  Use the right tool – Do not force the tool or any 

attachment on the tool to do a job for which they were 

 

not designed. 

9. Wear proper apparel – Do not wear loose articles of 

clothing or jewelry since such items may get caught 

in moving parts. Use of heavy-duty rubber gloves, 

substantial non-skid footwear, and close-fitting clothing is 

recommended when working outdoors with power tools.

10. Wear protective hair coverings to contain long hair. 
11. Always wear safety glasses and ear defenders to 

provide eye and ear protection – Everyday eyeglasses 

only have impact resistant lenses and do not provide the 

same protection as safety glasses.

12. Wear face or dust masks – If the cutting operation is 

dusty, the use of a face or dust mask specially designed 

to filter out microscopic particles is recommended.

13. Do not overreach – Keep proper footing and balance  

at all times.

14. Maintain tools with care – Keep tools sharp and clean 

for best and safest performance. Follow instructions for 

lubricating and changing accessories. 

1

Summary of Contents for Sunjoe 20ViON-CS10

























Reviews: