background image

• 

When not in use, your machine should be stored indoors 

in a dry and high or locked-up place, out of 

the reach of 

children.

Battery C Disposal

Always dispose of your battery pack according to federal, 

state, and local regulations. Contact a recycling agency in your 

area for recycling locations.

m

CAUTION!

 Even discharged battery packs contain 

some energy. Before disposing, use electrical tape to cover 

the terminals to prevent the battery pack from shorting, which 

could cause a fire or explosion.

m

WARNING! 

To reduce the risk of injury or explosion, 

never burn or incinerate a battery pack even if it is damaged, 

dead, or completely discharged. When burned, toxic fumes 

and materials are emitted into the surrounding atmosphere.

1. 

Batteries vary according to device. Consult your manual 

for specific information.

2.  Install only new batteries of the same type in your product 

(where applicable).

3.  Failure to insert batteries in the correct polarity, as 

indicated in the battery compartment or manual, may 

shorten the life of the batteries or cause batteries to leak.

4.  Do not mix old and new batteries.
5. 

Do not mix Alkaline, Standard (Carbon-Zinc), or 

Rechargeable (Nickel Cadmium, Nickel Metal Hydride, or 

Lithium-Ion) batteries.

6. 

Do not dispose of batteries in fire.

7.  Batteries should be recycled or disposed of as per state 

and local guidelines.

Service and Support

If your Sun Joe

®

 20iON-CS10 cordless chain saw requires 

service or maintenance, please call 1-866-SNOWJOE 

 

(1-866-766-9563) for assistance.

Model and Serial Numbers 

When contacting the company, reordering parts, or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

located on the housing of the unit. Copy these numbers into 

the space provided below.

Record the following numbers from the housing or handle of your  

new product:

Model #:

Serial #:

 2   0   i    O   N   -   C   S   1   0

20

Chain Maintenance Table

40

3/8

inches

mm

Drive Links

Chain Pitch

Chain Gauge

File Diameter

inches

mm

inches

mm

9.5

0.050

1.3

4

5/32

Summary of Contents for Sunjoe 20ViON-CS10

























Reviews: