14
Operating Tips
m
WARNING!
For your safety and that of others:
1. Do not use the machine without reading the instructions
carefully. Become acquainted with the controls and
the proper use of the machine. Learn how to stop the
machine quickly.
2. Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
3. Always wear suitable clothing when using the machine.
Wear anti-vibration gloves and other personal protective
equipment.
All the above-mentioned precautions do not, however,
guarantee the prevention of certain risks – i.e. Raynaud’s
phenomenon or Carpal tunnel syndrome. For operators
who use this machine for prolonged periods, it is therefore
recommended to have periodic checkups on their hands
and fingers. If any of the above mentioned symptoms
should appear, please contact a physician immediately.
4.
Work only in daylight or good artificial light.
5. Take utmost care when working near metal fences.
6.
Take care not to hit the bar hard against foreign objects or
flying debris caused by the movement of the chain.
7.
Stop the motor and remove the battery from its
compartment:
–
Whenever you leave the machine unattended;
–
Before cleaning, checking or servicing the machine;
–
After striking a foreign object. Inspect the machine for
any damage and make repairs before restarting it
again;
– If the machine begins to vibrate abnormally,
immediately look for the cause of the vibrations
and have the machine inspected at an authorized
Snow Joe
®
+ Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563) for assistance.
– When the machine is not in use.
IMPORTANT! Always remember that an incorrectly used chain
saw may disturb others and have a serious impact on the
environment.
To respect people and the environment:
• Avoid using the machine in environments or at times of the
day when it may disturb others.
• Scrupulously comply with local regulations and provisions
for the disposal of waste materials after sawing.
• Scrupulously comply with local regulations and provisions
for the disposal of oils, damaged parts or any elements
which have a strong impact on the environment.
• A certain amount of chain lubricating oil is released into
the environment when the machine is running, so only use
biodegradable oils made specifically for this use.
• To avoid the risk of fire, do not leave the machine with the
engine hot on leaves or dry grass.
m
WARNING!
It takes specific training to use the machine
for felling and delimbing.
Checks During Work
• Checking the chain tension
The chain tends to stretch gradually as you work, so you need
to check its tension frequently.
IMPORTANT!
During the first period of use (or after replacing
the chain), the chain tension must be checked more frequently
due to settling of the chain.
m
WARNING!
Never work with the chain loose, as it can
be hazardous if the chain slips out of its guides.
To adjust the chain tension, follow the instructions in
“Adjusting the Chain Tension” on pages 10.
• Checking the oil delivery
IMPORTANT!
Never use the machine without lubrication! You
can check the oil level in the tank through the transparent
gauge. Make sure you fill up the oil tank every time you use
the machine. For best results, use only a good quality bar and
chain oil designed specifically for use with chain saws.
m
WARNING!
Make sure the bar and the chain are in
place when you check the oil delivery.
Start the motor and check if the chain oil is delivered as shown
below (Fig. 19).
Fig. 19
Summary of Contents for Sunjoe 20ViON-CS10
Page 24: ...snowjoe com...
