background image

8

Technical Data

Motor  ................................................

 900 W Brushless

Battery Voltage* .................................

 48 V D.C. (2 x 24V)

 

Battery Capacity ................................  4.0 Ah each

Battery Runtime Max 

 ........................  25 min

 

Clears up to 1,300 sq ft 

 of 3" snow

Charger Input ....................................

 120 V AC, 

 60 Hz, 160 W

Charger Output  .................................

 26 V DC, 2 x 2.2 A 

Charging Time Max 

 ..........................  1 hr 50 min 

No Load Speed  ................................

 2100 ± 10% rpm

Rotor  .................................................

 

Steel auger 

 with 2 rubber blades

Clearing Width  ..................................  18 in. (46 cm)
Depth of Snow Cut  ...........................  8 in. (20 cm)

Throw Distance Max 

 .........................  20 ft (6 m) 

Plowing Capacity Max 

 ......................

 485 lbs/min (220 kg/min)

Stages  ..............................................  Single stage
Type of Snow  ....................................

 Light, fluffy

Directional Control  ............................

 180º adjustable chute

LED Light  ..........................................  3 W

Tire size 

 ............................................  8 in (20 cm)

Weight (without batteries)  .................  26.4 lbs (12 kg)
Weight (with batteries)  ......................  30 lbs (13.6 kg)

*Generates 48 V max with two 24 V lithium-ion batteries. Initial no-load voltage, 

per fully charged battery, peaks at 24 V. Nominal voltage under typical load 

is 21.6 V.

Unpacking

Carton Contents:

• Cordless snow blower
• Upper handle frame
• Middle handle frame
• Chute deflector
• Handle knobs/Deflector knobs

 (6)

• Handle bolts (2)
• Square J-bolts (2)
• Carriage bolts (2)

Rubber washers (2)

• 24V iON+ lithium-ion batteries (2)
• 24V iON+ lithium-ion dual port charger
• Manuals with registration card

1. Carefully remove the cordless snow blower and check to

see that all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you find damaged or

missing parts, DO NOT return the unit to the store. Please

call the Snow Joe

®

 + Sun Joe

®

 customer service center at

1-866-SNOWJOE (1-866-766-9563

).

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use the cordless snow

blower. The packaging is made of recyclable materials.

Properly dispose of these materials in accordance with

local regulations or save the packaging for long-term

product storage.

IMPORTANT!

 The equipment and packaging material are not 

toys. Do not let children play with plastic bags, foils or small 

parts. These items can be swallowed and pose a suffocation 

risk!

Battery Pack Operation

The equipment is powered by 2 lithium-ion batteries. 

 

The battery packs are completely sealed and maintenance 

free.

m

WARNING!

 The cordless snow blower can only be

powered by both of the batteries together. One battery cannot 

provide sufficient power to the tool. Make sure to use two 

batteries of the same voltage and the same capacity. Using the 

tool with batteries of different capacity will cause damage to 

the batteries.

Battery Charge Level Indicator

The battery packs are equipped with a push button for 

checking the charge level. Simply press the push button to 

read off the battery charge level from the LEDs of the battery 

indicator:

• All 3 level monitoring LEDs are lit: Battery charge level

is high.

• 2 level monitoring LEDs are lit: Battery charge level is

decreasing. Stop work as soon as possible.

• 1 level monitoring LED is lit: Battery is flat. Stop work

IMMEDIATELY and charge the battery. Otherwise the

battery’s service life will be greatly shortened.

Charge level button 

The battery is at 30% capacity 

and requires charging
The battery is at 60% capacity 

and requires charging soon

The battery is at full capacity

Light Indicators

Lights

Summary of Contents for 24V-X2-SB18U



















Reviews: