background image

15

include gasoline, turpentine, lacquer thinner, paint thinner, 

chlorinated cleaning solvents, ammonia and household 

detergents containing ammonia. Never use flammable or 

combustible solvents around battery packs, 

 

battery chargers or tools.

4. The 24V iON+ lithium-ion battery charger has no

serviceable parts.

Storage

1. Run the machine a few minutes after throwing snow to

prevent the auger from freezing.

2.

Examine the cordless snow blower thoroughly for worn,

loose or damaged parts. Should you need to repair or

replace a part, contact an authorized Snow Joe

®

 +

Sun Joe

®

 dealer or call the Snow Joe

®

 + Sun Joe

®

customer service center at 1-866-SNOWJOE

(1-866-766-9563) for assistance.

3. Clean the snow blower before storing or transporting.

Be sure to secure the unit while transporting.

4. Remove the batteries from the cordless snow blower

before storing.

5. Store the cordless snow blower indoors

 in a locked,

dry place out of the reach of children to prevent

unauthorized use or damage.

6.

Maintain safety and instruction labels, as necessary.

7.

Always refer to the B Charger Off-Season Storage

section for important details if the snow blower is to be

stored for an extended period.

B Charger Off-Season Storage

1.

Do not expose your battery packs or charger to water,

rain or allow them to get wet. This could permanently

damage the charger and the battery packs. Do not use oil

or solvents to clean or lubricate your battery packs as the

plastic casing can become brittle and crack, causing a

serious risk of injury.

2. Store the battery packs and charger at room temperature

away from moisture. Do not store in damp locations where

corrosion of terminals may occur. As with other battery

pack types, permanent capacity loss can result if the pack

is stored for long periods of time at high temperatures

(over 120ºF/49ºC).

3. 24V iON+ lithium-ion battery packs maintain their charge

during storage longer than other battery pack types.

As a general practice, it is best to unplug the battery

charger and remove the battery packs when they are not

in use. Recharge the battery packs every 6 months to

50% capacity (2 lights on) during off-season storage to

maintain optimal battery performance.

Battery C  

Disposal Information

Always dispose of your battery packs according to federal, 

state, and local regulations. Contact a recycling agency in your 

area for recycling locations.

m

CAUTION!

 Even discharged battery packs contain

some energy. Before disposing, use electrical tape to cover the 

terminals to prevent the battery packs from shorting, 

 

which could cause a fire or explosion.

m

WARNING!

 To reduce the risk of injury or explosion,

never burn or incinerate battery packs even if it is damaged, 

dead or completely discharged. When burned, toxic fumes 

and materials are emitted into the surrounding atmosphere.

1. Batteries vary according to device. Consult your manual

for specific information.

2. Install only new batteries of the same type in your product

(where applicable).

3.

Failure to insert batteries in the correct polarity, as

indicated in the battery compartment or manual, may

shorten the life of the batteries or cause batteries to leak.

4.

Do not mix old and new batteries.

5.

Do not mix Alkaline, Standard (Carbon-Zinc) or

Rechargeable (Nickel Cadmium, Nickel Metal Hydride,

or Lithium-Ion) batteries.

6.

Do not dispose of batteries in fire.

7. Batteries should be recycled or disposed of as per state

and local guidelines.

S Support

If your Snow Joe

®

 24V-X2-SB18U cordless snow blower 

requires service or maintenance, please call the Snow Joe

®

 + 

Sun Joe

®

 customer service center at 1-866-SNOWJOE 

 

(1-866-766-9563).

Model + Serial Numbers 

When contacting the company, reordering parts or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

located on the housing of the unit. Copy these numbers into 

the space provided below.

Record the following numbers from the housing or handle of your  

new product:

Model #:

Serial #:

2    4   V   -   X  2   -   S   B  1   8  U

Summary of Contents for 24V-X2-SB18U



















Reviews: