19
Remove the caliper
Check the condition of the brake pads. The limit of the thickness
(1) of the working material of the brake pads is 0.5 mm. If the
brake pads are worn-out, replace them.
If the brake pads are in order, set and adjust the brake caliper as
described in
10.2.1 on page 18
�
10.3 Disassembling the caliper
Loosen the bolts 1 and disassemble the caliper.
1�
Caliper
2� Stop
3�
Brake pad
4�
Spring
5�
Caliper cover
6�
Bolts of the caliper cover
10.4
Brake discs. Check, removal, installation
Check the disс without removing from SNOWDOG. The disc should
not have any deviations from the plane, signs of overheating in
the form of darkening, blueing.
Allowed is the brake pads’ touching the disc, if its rotation is not
obstructed�
!
WARNING
BE VERY CAREFUL IN WORKING WITH THE
PARKING BRAKE. THE ROTATING DISC IS SHARP
ENOUGH TO SEVERELY INJUR YOU. THE BRAKE
DISC IS HEATED DURING OPERATION AND CAN
CAUSE BURN.
