SNOWDOG Snowdog COMPACT, Repair Manual

Page: 16 / 26

16
9 Reverse gear
9.1 Oil change
1� Place under the gear unit case a suitable container for
oil collection, then unscrew the oil drain bolt with a
washer.
2� Allow the used oil to drain completely, then reinstall
the oil drain bolt and a new washer, tighten the bolt of
the oil drain with the torque of 21 Nm. .
The oil level in the gear unit is checked by draining and measuring
the amount of discharge.
! WARNING
IT IS RECOMMENDED TO FILL THE REVERSE GEAR
WITH THE ENGINE OIL. THE REQUIRED AMOUNT
OFOIL IN THE GEAR UNIT IS 200 ML
3� Unscrew the breather adapter.
4� Fill with new oil through the breather adapter hole,
then screw the breather adapter with the torque of
21 Nm�
9.2 Removal, disassembly, assembly and
installation of the reverse gear
V NOTE
BEFORE REMOVING THE REVERSE GEAR, FULLY
DRAIN IT.
1� Remove chain protection.
2� Remove chain.
3� Loosen the bearing bolts