324-128
Drop Kit
Installation
Instruction
2
|
P a g e
SnowBear
®
Drop Kit Installation - 324-128
Safety Precautions - Read Before Installation
DISCONNECT POWER BEFORE INSTALLATION
. Disconnect Plow power cord from
vehicle plug before attempting to install Drop Kit. Failure to do so could result in injury if
Plow Winch should be activated.
ONLY USE SNOWBEAR
®
CERTIFIED PARTS AND ACCESSORIES
. Consult the owner’s
manual for the recommended accessories and/or replacement parts. The use of improper
accessories and/or replacement parts may cause hazards and void applicable warranties.
REMOVE IGNITION KEY, PUT VEHICLE IN PARK
. In order to prevent others from
starting vehicle or vehicle from moving while Drop Kit is being installed, remove key from
ignition and put vehicle in park or in gear.
RECOMMENDED 2 PERSON INSTALLTION
. It is recommended that 2 people perform
this installation as it requires some lifting of heavy objects/assemblies and a need to align
holes to install hardware.
Assembly tool list
Ratcheting Wrench
3/4" Socket (x2)
OR 3/4"Open Ended/Box Wrench (x2)
