324-128
Drop Kit
Installation
Instruction
6
|
P a g e
SnowBear
®
Drop Kit Installation - 324-128
Step 5:
Install remaining Drop Kit Plate on pin of A-Frame Weldment in the same hole as on opposite side. Slide Drop
Kit Plate between Winch Arm & Receiver Weldment and install 1/2"-13 x 2" Hex Bolts & Nuts (supplied in
Hardware Kit) and tighten completely. Tighten all hardware at the Winch Motor Assembly.
Drop Kit is installed and ready for use.
Drop Kit Plate
1/2"-13 x 2" Hex
Bolts & Nuts
Winch Arm & Winch
Motor Assy Hardware
