© V. 0313, Snow Performance, Inc
Pump Installation
Braided Line Kits Only
- Install
(2) 3/8” NPT to 4AN Straight
fittings into the pump inlet and
outlet using E6000® sealant on
the threads.
Do not overtighten
as damage to the pump
housing can occur.
Quick Connect Kits Only
-
Remove the blue rubber plugs
from the quick-connect fittings by
first pushing the plug toward the
pump, hold the grey collar
against the pump, and gently pull
the blue plug from the fitting.
Warning: Pulling against the
quick connects with excessive
force may cause fitting damage.
Step 1: Position the fluid pump so
that the inlet is positioned at or
below the lowest point of the reservoir, and within two feet of the
reservoir. (Pump can be installed in any orientation). This will ensure the
pump is primed with fluid for optimal flow and pressure to the nozzles.
**Arrows on the pump inlet and outlet indicate the direction of fluid
flow**