© V. 0313, Snow Performance, Inc
Max Injection
•
Setting screen 2 (see right) is used to select
what boost pressure will correlate to max
injection. This should be set the vehicles
maximum boost level using the red buttons
below the up and down arrows to adjust the
psi to desired setting. Press the red button
underneath the arrow pointing right to move
to setting screen 3.
Power Nozzle
•
Setting screen 3 (see right) is used to
select what boost pressure a second
stage of injection will be triggered.
If a
dual stage system is not being used
this must be set above 50 psi to the
“off” setting to avoid fault code
.
Press the red button underneath the
arrow pointing right to move to setting
screen 4.
Text Color
•
Setting screen 4 (see right) is used to select
what text color will be displayed on screen.
Using the red buttons below the up and
down arrows adjust the color to the desired
setting (Red, Blue, Green, Yellow, Orange,
Purple, White) available. Press the red
button underneath the arrow pointing right to
move to setting screen 5.
Graph Color
•
Setting screen 5 (see right) is used to
select what Graph color will be
displayed on screen. Using the red
buttons below the up and down arrows
adjust the color to the desired setting
(Red, Blue, Green, Yellow, Orange,
Purple, White) available. Press the red
button underneath the arrow pointing
right to move to setting screen 6.