© V. 0313, Snow Performance, Inc
** Spray pattern should be 120º and
a fine mist. See photo.
**If the pump fails to activate,
check power and ground wiring**
Maintenance
Remove nozzle(s) and clean screen filters once per year using a
calcium removing formula such as CLR
®
The Boost Cooler® has been designed to operate with high
concentrations of methanol. Oil or other additives are not required
for system lubrication, and can cause damage to the system.
Contaminants in the fluid such as dirt can damage the system.
Ensure that dirt and debris do not fall into the tank.
Do not use Teflon tape or paste to seal connections. These sealers
are not as effective as the Goop sealant provided and can break
down over time, clogging components.