Snorkel SR1054 Operator And Maintenance Manual Download Page 60

Page: 60 / 196

Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000

Snorkel International, LLC

2009 Roseport Road

Elwood, KS 66024

www.snorkellifts.com

3.2.1.6

MENU PAGE

The “menu” page displays all the pages where the operator can access and view certain
information.

Scrolling menu with lateral indicator. The following screens are identified:

Language

Display

Software version

Engine

Engine errors

Vehicle errors

Inputs

FNR mode

Constant current (optional)

Press the UP button to go to the selection of the previous page.
Press the DOWN button to go to the selection of the next page.
Press the OK button to enter the selected page.
Press the MENU button to go back to the “main” page.

Summary of Contents for SR1054





































































































































































































Search results

Summary of Contents for SR1054

Reviews:

Related manuals for SR1054

Brands by name

Popular brands

Snorkel SR1054, Operator And Maintenance Manual

Search results

Summary of Contents for SR1054

Reviews:

Related manuals for SR1054

Brands by name

Popular brands