Snorkel S3006P, Operator'S Manual

Page: 10 / 25

8 PUSH PRO -0120843
Controls and Indicators
The operator shall know the location of each control
and indicator and have a thorough knowledge of the
function and operation of each before attempting to
operate the machine.
Figure 2 – Lower Controls and Indicators
1. Tilt/lowering alarm
2. Battery charge indicator
3. 110V battery charger plug
4. Tray latch
5. Ground operation button
6. Platform raise button
7. Emergency stop button
8. Platform lower button
9. Control selector switch
10. Diagnostic Port
Figure 3 – Upper Controls and Indicators
11. Interlock button
12. Battery condition indicator LED
13. Platform lower button
14. Platform raise button
15. Emergency stop button
!
Danger
Pinch points may exist between moving
components. Death or serious injury will result
from becoming trapped between components,
buildings, structures, or other obstacles. Make
sure all personnel stand clear while operating the
aerial platform.
• Controls to position the platform are located on
the lower control panel on the chassis and on the
upper control panel in the platform.
Lower Controls
The lower controls (refer to Figure 2) are located on
the right side of the chassis.
The following are located on the lower control panel:
• Emergency stop button
• Control selector switch
• Ground operation button
• Platform raise/lower buttons
• Battery charger
!
Warning
The aerial platform is free to move when the
brakes are released. Death or serious injury can
result. Engage the brakes before operating the
aerial platform.
Emergency Stop Button
The emergency stop is a two-position red push
button.
• Push the button inward to disconnect power to all
control circuits.
• Pull the button outward to restore power.
Control Selector Switch
Insert the key into the control selector switch.
• Turn the switch to the lower controls position to
operate aerial platform functions from the lower
controls. The upper controls will not operate while
the control selector is in the lower position.
• Turn the switch to the upper controls position to
operate the aerial platform functions from the
upper controls.
• In the center position, aerial platform functions will
not operate from the lower or upper controls.
Controls and Indicators
2
3 6
9
5
4
7 8
1 10
12
14
13
15
11