Chapter 6. Shut-offs and Circuit Breakers
■
RCD/ELCB Outlet (option)
Figure 5.1 - RED/ELCB Outlet
The RCD (Re sid ual Cur rent De vice) is lo cated at
the base and will pro tect against short cir cuits to
earth. When there is a short cir cuit the RCD will
shut down the 230v AC power to the plat form out -
let.
To re set the out let dis con nect the power tool lead
from the plat form box and re set the RCD at the
base.
If the prob lem per sists call a trained ser vice tech ni -
cian.
■
Electrical Circuit Protection
There is only one (1) fuse, on a stan dard EPV16,
that is ac ces si ble to the op er a tor. Its pur pose is to
pro tect the elec tri cal cir cuits from elec tri cal over -
loads. When the fuse blows re place it with an iden -
ti cally rated fuse. If the fuse blows a sec ond time,
take the EPV16 out of ser vice and re fer the prob -
lem to a qual i fied trained ser vice tech ni cian for re -
pair.
■
Stabilisers
Figure 5.3 - Stabilisers
The EPV16 booms can not be raised un less the sta -
bi lis ers are set and the lift en able light on the lower
con trol box is lit. Once the booms are raised from the
stowed po si tion the sta bi lis ers be come dis abled un -
til the booms are stowed in the travel po si tion.
EPV16 – 13642-1
Rev A
page 6 - 1
