Fig ure 8.8 - Up per Con trols - Non-In su lated
Fibre glass Bas ket, Plat form Move ment
Con trol Valve levers
9.
Enable Switch (Foot)
:You must step DOWN
on the foot switch in con junc tion with the
boom/plat form mov ing func tion you se lect.
The pur pose of this switch is to pre vent the
plat form/booms from mov ing if some thing or
some one ac ci den tally pushes one of the
boom/plat form mov ing con trols. The
boom/plat form mov ing con trols will not
op er ate un less the en able foot switch is held
down at the same time.
Figure 8.9 - Upper Controls, Enable Foot
Switch, Fibreglass Basket
❑
Upper controls (insulated fibreglass
basket):
❍
Emergency stop switch
❍
Choke
❍
Start switch
❍
Lift enable indicator
❍
Overload indicator
❍
Fuel / electric selector switch (Option)
❍
Emergency lower switch
❍
Valve control lever for slew
❍
Valve control lever for lower boom
❍
Valve control lever for upper boom
❍
Valve control lever for fly boom
❍
Optional Valve control lever for platform
rotate
❍
Enable switch (Foot)
1.
Emergency Stop
: Press the red
EMERGENCY STOP button in, at any time,
under any conditions, and the entire machine
stops, and nothing moves. This switch must
be out (on) to start or run the EPV from the
platform control box. Pull the switch and it
will pop out (on). Press the switch in (off) if
the platform is to stay in one position for a
long time. That will turn the engine off and
and save fuel.
Figure 8.10 - Upper Controls - Insulated
Fibreglass Basket
2.
Choke/Cold Start:
Hold the switch DOWN
while you start an engine that is at ambient
air temperature (a "cold" engine). This will
choke the engine.
3.
Start Switch
: Press and hold this switch
DOWN to operate the starter motor of the
EPV16.
4.
Lift En able
: The plat form can only be raised
when this light is lit. When this light is not lit
the plat form will not raise be cause the
out rig gers are not prop erly set.
5.
Overload Indicator
: This in di ca tor
il lu mi nates when the plat form is over loaded
(see Safety De vices Chap ter 3 Page 4).
6.
Fuel / Electric Selector Switch (Option)
:
This switch (when fitted) allows switching
between different motive sources (see
Options Chapter).
page 8 - 6
Rev A
EPV16 – 13642-1
8 Controls - Hydraulic
ROTATE
RIGHT
LEFT
JIB
BOOM
UP
DOWN
UPPER
BOOM
UP
DOWN
LOWER
BOOM
UP
DOWN
SLEW
RIGHT
LEFT
13687-1 REV
A
LIFT
ENABLE
CHOKE
lb
kg
START
ELECTRIC
FUEL
EMERGENCY
LOWER
