Snooper syrius s600 plus, User Manual

Page: 26 / 59

26
Return to contents
Once all fields have been completed you can view the new position by pressing ‘Map’ at the bottom of the screen.
l
Press ‘Set’
l
Select the maximum radius you wish the unit to search for (the default setting
is 30 miles) and then press ‘OK’
l
Press ‘ Category’ and enter the category type using the keyboard displayed.
If you do not know which category to type, you can press the down arrow to
the right of the lower window and all the category types will be displayed in
alphabetical order. Use the arrows to the right of the display to scroll up and
down through the category options. Once you find the category you are looking
for select it with your finger.
A list of POI’s within the specified radius and category will be displayed. Use the
arrows to the right hand side of the screen to scroll up and down through the
options. When you find the POI that you are looking for, select it with your finger
l
To start the journey press ‘Calculate’
l
To view the location of the POI, press ‘Map’ .
l
To change the route parameters press ‘Route Option’ (see Route Options on
page 35 for specific instructions).
l
To return to the previous page press the return arrow located on the
bottom right hand corner of the display.
Once the calculation is complete you can either press ‘Go’ to start navigation,
‘Simulation’
to see the actual route that will be taken,
‘Route Option’
to
change the parameters of the route or ‘Guide’ which will list the turn by turn
instructions of the journey. The ‘Summary Screen’ will tell you the distance to
your destination, estimated time of arrival and the estimated time it will take to
complete your journey.
Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically
begins to provide you with turn-by-turn instructions.
3.11
This function allows you to select a destination by simply selecting any road on
any area of the map stored within your unit.
To navigate using this facility
l
Press the centre of the screen to access the ‘Navigate to’ menu.
l
Press the black arrow once.
l
Press the ‘Find by Map’ icon.
The screen will show a section of the map (usually of your current position with a
road selected in red).