9
Start Up – Installing the SD Card
Before using your Sapphire Plus, you will need to install the micro SD Card included with the
device. The micro SD Card comes complete with a digital map of the UK and Ireland or Western
Europe depending on the model purchased and is also where the Enigma™ camera database is
stored if you choose to subscribe and download it.
Start by removing the Battery cover from the back of the unit and open the micro SD Card slot,
then remove the micro SD card from its packaging and insert it into the micro SD Card slot as
indicated. Close the micro SD slot cover and then replace the battery cover. Finally switch on the
device by pressing and holding the standby power button located on the top of the unit for 2
seconds. As soon as the device is switched on, the Sapphire Plus will automatically synchronise
with the micro SD Card. Once the synchronisation is completed, the micro SD Card will not
function with any other device. Your Sapphire Plus is now ready to navigate and the camera
database can be downloaded if necessary.
Please note that if the unit does not activate when you press and hold the standby power button for 2 seconds
it may require charging. Refer to the section on ‘Power Connection and Charging’ later in this manual.
System Requirements and Downloading
Before you can begin to download the database onto your Sapphire Plus, you will need to install the Sapphire Plus Updater-
software provided on the CD ROM.
In order for the software to be installed successfully, there are certain minimum hardware and software requirements needed.
Hardware Requirements
The computer must have an Intel Pentium Class processor or equivalent, a minimum of 32MB of RAM, a monitor with 256
(8 bit) colours or greater, a CD ROM drive, 20MB of free disc space and a spare USB connection.
Software Requirements
The software will only operate on the following Windows based operating systems:
Windows 2000, Windows XP
or
Windows Vista
and will only work with Internet Explorer 6 or Netscape Navigator 6 or above.
NOTE: The Sapphire Plus Updater software does not support Windows 95, 98 or Apple Macintosh operating systems.
Software Installation Instructions
Place the Software CD into the CD ROM or DVD drive. Your PC should automatically open a window displaying the
instructions for installing the software. Follow the instructions onscreen to install the download software
To launch the CD manually: Click on
Start
and then
Run
. In the dialogue box that opens click on
Browse
– another dialogue
box will open. Locate your CD ROM or DVD drive (drive letter is normally D) using the ‘Look in’ option and select ‘Menu’
from the lower portion of the dialogue box. Once you have selected ‘Menu’ click on
Open
on the explorer box and then
OK
on the
Run
dialogue box.
Please make sure that the operating system installs the new hardware first before installing the Sapphire Plus Updater
software. Once the ‘Sapphire Plus Updater’ software has been installed click ‘Finish’ and then close the CD auto run window.
After installing the software, please re-boot your PC.
Any later software updates or packages can be obtained from
www.snooperneo.co.uk
. If you have any problems using this
software please call 0870 787 0700 during office hours and select Option 3.
Once the software is installed you are ready to download the database onto your Sapphire Plus. Double left click the
‘Sapphire Plus’ icon, which can be located on your desktop.
When the Sapphire Plus Updater program is run for the first time you will be asked to select your language and then to select
the camera data that you wish to download. Select the data you would like and then click ‘OK’. The software is now ready for
use.
Return to contents
SD Card
Battery Cover
