81 • UK
Return to contents
8series100614
DVB-T Portable Digital Television
IMPORTANT NOTICE. PLEASE READ
Never attempt to watch DVB-T digital TV whilst driving a vehicle. If a passenger wishes to view DVB-T in a moving vehicle, the unit
must be positioned so that the driver cannot see the screen. Watching DVB-T TV whilst driving is illegal and highly dangerous.
Do not operate or attempt to operate this device whilst driving a vehicle.
Please install this product in a place where it does not interfere with the safety of the vehicle or any of the controls of the vehicle.
When installing this device make sure that the unit is placed in a position that does not obscure the drivers view of the road.
Please note that this function will only work in areas with a digital TV
broadcast. Reception will vary depending on the strength of signal being
transmitted in your region. Adding an extension DVB-T antenna can improve
reception and can be purchased separately.
Programming and searching for channels
To view DVB-T, firstly extract the DVB-T antenna and then enter the Main menu , To
show the home menu press for 1 second the on/off switch on the top of the unit,
and press the DVB-T button. Next press the setting button followed by the REGION
button. Select the region you are in. Then press the SCAN button followed by the
START button. The 8 Series will then begin to scan for the channels available in
your area.
When’ Progress’ reaches 100% the 8 Series will have finished scanning for
channels. The number of TV and Radio channels found will be displayed on the left
hand side of the screen. A list of channels found can be viewed on the right hand
side of the screen.
Please note that the number of channels found is dependent on the
quality of the digital TV service in your area. If no channels are displayed
repeat the process and start the scanning process again. DVB-T will only
operate in areas with a digital TV broadcast.
Viewing DVB-T TV and Radio channels
Once the 8 Series is displaying a list of channels in the Program List press the
back arrow in the top right hand corner of the screen. This takes you back to
the DVB-T SET screen, press the back arrow again to take you to the DVB-T main
menu screen. Double click on the channel you would like to watch and if there
is sufficient signal strength the channel will appear in the small viewing window on the left hand side of the screen. To watch the
program in full screen mode simply press on this window once. Touch the screen again to return to the DVB-T main menu screen.
DVB-T main menu features
1. Volume control
Adjust the volume by pressing the minus button to reduce the volume or the
plus button to increase the volume.
2. EPG
Press this button to view program information of the channel highlighted in
the program list
3. SET
Press this button to enter the channel scanning mode and DVB-T settings.
4. TV
9
1
2
8
3
6
7
4
5
Press the image to switch to full screen view