19 • EN
Return to contents
Snooper Player Explained
1. Click to take a snap shot from any section of video
recorded.
2. Save route data. Select a folder to export it from
the Snooper Player and save it to your PC.
3. Delete routes recorded and no longer required,
from the Snooper Player.
4. Change settings such as Language and set up a
password to protect your data (refer to setting
section).
5. View video footage in ‘slow motion’.
6. Stop video footage playing.
7. Play/pause video footage.
8. Increase speed of video footage.
9. Adjust volume of audio.
10. Run video footage on repeat.
11. Rotates video footage 180 degrees.
12. Export GPS coordinates to your PC in KML format.
13. Hides or displays Google Map view window.
14. Hides or displays G-sensor information.
15. Repairs broken files.
16. Unlock ‘Incident/Event’ video footage.
17. Adjust Brightness, Contrast and Saturation of the
displayed video.
18. GPS Coordinates.
19. Your speed reading. Click to switch between mph and km/h.
20. Video footage.
21. Compass heading.
22. Adjust size of Snooper Player window.
23. Google Map view. Shows route track using coordinates collected and saved by MySpeed DVR antenna.
24. G-sensor information window. Displays any event information such as hard breaking, impacts or sharp turns that might indicate
that an incident has occurred on a recorded route.
25. Main route folders listing.
26. Sub route files listing.
Settings
Click on button 5 to access the settings options:
1. Change the path to Micro-SD card.
2. Formats the Micro-SD card - this will remove all data
from the card.
NOTE: if a MicroSD card which was not supplied with
the MySpeed DVR then it MUST be formatted using
this software BEFORE it is used in the device. We also recommend that all SD cards used for the DVR should be formatted every
6-8 weeks.
3. Firmware upload> If new firmware for the DVR should be released, click on this button and follow the on screen instructions.
Check on the Snooper website for available updates: www.snooperneo.co.uk
4-6 Add or change a password. The password protects the DVR files from deletion by unuthourised users.
7. Saves password setting to the Micro-SD card.
8. Changes the Map.
9. If a replacement Micro-SD card is used it needs to be of a sufficient class or speed - click this button to test the card.
10. Changes the Snooper player language.
11. Apply and save any changes made to the setting menu.
12. Click to show Snooper player version number.
20
23
24
25
26
15
1
16
2
17
3
4
5
6
7
8
9
10 11 12 13 14
18
19
21
22
1
2
3
4
5
6
7
8
9
11
10
12
MySpeed DVR V1.0 GB 08/17
Summary of Contents for My-Speeed DVR
Page 1: ...User manual...
