ASSEMBLY INSTRUCTION
5
1. Lock the Cushion blocker (F) and use the Wrench #5 to tighten the screws (G) you picked in Step
1 into the track.
STEP 3
1. Remove the tank plug (H) from the upper tank.
2.Water injection as shown in figure 4. Insert the water pump intothe tank, and place a bucket next to
the rowing machine, and use the water pump pumps water from the bucket into the tank. Refer to
the digital mark on the side if the tank to measure theamount of water in the tank. Then stuff the
water tank plug(H) back into the upper tank. Lastly,use a dry cloth to dry the water around the
rower.
STEP 4
Figure 3
Figure 4
