IQOTX80/81/82/83/84/99
www.snellgroup.com
Technical Profile
Inputs and Outputs
Signal Inputs
Electrical
3 Gbps HD-SDI, 1.485 Gbps HD-SDI or 270 Mbps SD-SDI (asynchronous
operation available at other frequencies)
Connector / format
BNC / 75 ohm, DIN1.0/2.3, HDBNC panel jack
Conforms to
SMPTE 424M (HD level A)
SMPTE 292M (HD)
SMPTE 259M-C (SD)
Inputs
8
Input cable length
Up to 100m Belden 1694A @ 3Gbps
Up to 150m Belden 1694A @ 1.5 Gbps
Up to 250m Belden 1694A @ 270 Mbps
Signal Outputs
Optical
3 Gbps HD-SDI, 1.485 Gbps HD-SDI or 270 Mbps SD-SDI (asynchronous
operation available at other frequencies)
Connector / format
LC single mode SFP
Conforms to
SMPTE 297-2006
Outputs
1 to 4 per Channel
Controls
Indicators
Power OK
(Green)
CPU
OK (Green flashing)
Good
Hardware OK (Green)
Warning
SFP fit not as sold (Yellow), SFP warning active (Yellow flashing), OK (Off)
Error
Hardware error (Red), SFP alarm active (Red flashing), OK (Off)
Input 1-8
SD-OK (Yellow), HD-OK (Green), 3G-OK (Blue), other-OK (White flashing)
Bypass (Rate colour flashing), Loss (Red)
RollCall Functions
Input 1-8 rate select 3G, HD, SD, other
Reclock bypass
On/Off
Output 1-4 select
Input 1-4
Output 5-8 select
Input 5-8
Input status
Present, Loss, Unknown, Unrouted, Data Rate
Laser disable
On/Off
Logging
Input 1-8 Type
Input 1-8 Bit Rate
Input 1-8 Present
Input 1-8 Loss
Output 1-8 laser bias
Output 1-8 laser power
Output 1-8 laser wavelength
Issue 1 Rev 2
© 2012 Snell Limited
Page 5
