IQOTX80/81/82/83/84/99
www.snellgroup.com
SDI-Inputs 1-4 Screen
The SDI-Inputs 1-4 screen enables the:
•
Inputs and outputs to be configured.
•
The configuration mode to be used selected.
•
The rules governing configuration use to be specified.
SDI Inputs 1-4
•
SD/DVB-ASI (270 Mb):
•
HD (1.5Gb):
•
3G (3 Gb):
•
Others:
Check one or more of these checkboxes to determine which types of signal are
deemed to be valid for a particular input. If a signal is present on the input but not selected as
valid, its status will be
Error
.
Others
is for signals of type other than the above. Also, because
the reclockers are on the
outputs
, if an input is detected as present but not routed to an output,
its bit rate will be unknown and its status would be
Error
unless this box was checked.
•
Reclock Bypass:
Check this to bypass the reclocker, which is on the output signal.
•
The
Channel
Ident
,
I/P Name
,
I/P State
and
I/P Rate
are shown for each channel.
Issue 1 Rev 2
© 2012 Snell Limited
Page 11
