IQOMU31 / IQOMB31
www.snellgroup.com
Operation Using the RollCall Control Panel
Issue 1 Rev 2
Page 38
©
2013 Snell Limited
5.13 Status
The
Status
screen displays basic information about the module, such as the serial number
and software versions. Use the functions on the screen to restart the module or return all
settings to their factory or default settings.
•
Product:
The name of the module.
•
Software Version:
The currently installed software version number.
•
Serial Number:
The module serial number.
•
Build:
The factory build number. This number identifies all parameters of the module.
•
KOS:
The operating system version number.
•
PCB:
The Printed Circuit Board revision number.
•
Firmware:
The module firmware revision number.
•
Up Time:
The time since the module was last started.
•
Licensed Options:
The currently installed licensed options associated with the
module.
5.13.1 Factory Defaults
The
Factory Defaults
button enables the module settings to be reset to their factory defaults.
5.13.2 Default Settings
The
Default Settings
button enables module settings to be reset to their factory defaults,
leaving user memories intact.
5.13.3 Restart
The
Restart
button enables the module to be rebooted, simulating a power-up/power-down
cycle.
Note:
Resetting the module to its factory defaults also clears all the saved memory settings.
