manualshive.com logo in svg

Snell IQOMB312R-1A3, User Instruction Manual, Page: 6 / 38

Share
Download
Snell IQOMB312R-1A3 User Instruction Manual Download Page 6

IQOMU31 / IQOMB31

www.snellgroup.com

Introduction

Issue 1 Rev 2

Page 6

©

 2013 Snell Limited

1.3 Order Codes

1.3.1 IQOMU31

1.3.2 IQOMB31

Note:

Modules with “A” order codes (for example, IQOMU311T-1

A

3)

 

can be fitted into either A- or 

B-style enclosures. Modules with “B” order codes (for example, IQOMU311T-1

B

3)

 

can only 

be fitted into B-style enclosures. See page 7.

IQOMU311(2)T-1A3
IQOMU311(2)T-1B3

3G/HD/SD-SDI 4-channel AES multiplexer with fiber-optic output. 2 
SDI inputs, 2 SDI outputs, 1(2) optical output(s), 2 unbalanced AES 
inputs.

IQOMU311(2)R-1A3
IQOMU311(2)R-1B3

3GHD/SD-SDI 4-channel AES multiplexer with fiber-optic input. 2 SDI 
inputs, 2 SDI outputs, 1(2) optical input(s), 2 unbalanced AES inputs.

IQOMU31TR-1A3
IQOMU31TR-1B3

3G/HD/SD-SDI 4-channel AES multiplexer with fiber-optic transceiver. 
2 SDI inputs, 1 optical input, 2 SDI outputs, 1 optical output, 2 
unbalanced AES inputs.

IQOMB311(2)T-1A3
IQOMB311(2)T-1B3

3G/HD/SD-SDI 8-channel AES multiplexer with fiber-optic output. 1 
SDI input, 2 SDI outputs, 1(2) optical output(s), 4 balanced AES 
inputs.

IQOMB311(2)R-1A3
IQOMB311(2)R-1B3

3G/HD/SD-SDI 8-channel AES multiplexer with fiber-optic input. 1 SDI 
input, 2 SDI outputs, 1(2) optical input(s), 4 balanced AES inputs.

IQOMB31TR-1A3
IQOMB31TR-1B3

3G/HD/SD-SDI 8-channel AES multiplexer with fiber-optic transceiver. 
1 optical input, 1 SDI input, 2 SDI outputs, 1 optical output, 4 balanced 
AES inputs.

Summary of Contents for IQOMB312R-1A3







































Reviews:

No comments