![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqada01/iqada01_manual_1309046009.webp)
IQADA01
SECTION N34
IQADA01OPS 19/04/2007
www.snellwilcox.com
Version 1 Issue 1
N37.9
CARD EDGE INDICATORS
D1 D2 D3
Input OK
Input Warning
Channel 1
Channel 2
RV2
RV1
Power-Up/CPU Fault
FINE GAIN
Adjustment of the settings of the IQADA01 is available either via card edge controls and/or via a more
comprehensive remote control system using RollCall™
The adjustments are located on the front edge of
the card.
D1 Input OK (Green)
This LED will illuminate if either input or the primary
input (when in single channel mode) is present.
D2 Input Warning (Yellow)
This LED will illuminate if either input or the primary
input (when in single channel mode) is missing.
D3 Power-up or CPU fault (Red)
This LED will illuminate during power-up or indicate
a CPU fault.
RV1 and RV2
These controls allow the fine adjustment of gain for
channel 1 and channel 2 when dual channel mode.
When in single channel mode RV1 controls the
gain.
The range of control is ±0.5 dB and is in addition to
the coarse gain control.
LK1 and LK2 Single/Dual Channel Select Links
These links allow the unit to be configured as
either a single channel or a dual channel amplifier.
D1 D2 D3
Input OK
Input Warning
Power-Up/CPU Fault
Channel 1
Channel 2
RV2
RV1
FINE GAIN
Do Not Adjust
This Control
Do Not Adjust
This Control
LK1
LK2
Dual Channel
Single Channel
Single/Dual
Channel Select Links