![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqada01/iqada01_manual_1309046017.webp)
IQADA01
SECTION N34
IQADA01OPS 19/04/2007
www.snellwilcox.com
Version 1 Issue 1
N37.17
MENU DETAILS
(see IQADA01 Menu System on previous pages)
MAIN MENU
The main or top level menu allows various sub-
menus to be selected by pressing the button
adjacent to the required text line.
Note that where a menu item is followed by three
dots (...) this indicates that a further sub-menu may
be selected.
Whenever a menu item is selected the parameters
of that selection will be displayed in the Information
window of the front panel. Where the selection is
purely a mode selection and does not enable a
sub-menu, the text will become reversed (white-on-
black) indicating that the mode is active. If the
mode is not available for selection the text will
remain normal.
Also refer to the block diagram on page 4 for more
information.
MAIN MENU
IQADA01 MENU
Setup...
RollTrack...
Log ging...
Setup…
This allows various functions to be setup.
Setup
Setup
Gain 1
Gain 2
Silence Level
Silence Detect Time
Unit...
Gain 1 and Gain 2
When configured as a dual input amplifier these
controls allow the gain of the two input channels to
be adjusted.
Gain 1, Gain 2
Preset
0.0dB
Gain 1, Gain 2
The range is ± 24 dB in steps of 0.5 dB. Preset is
to 0.0 dB.
Note that when configured as single input amplifier
only the Gain 1 control will be available.
Silence Level
The level at which the signal is considered to have
dropped to silence may be set with this control.
Silence Level
-20dB
Preset
Silence Level
The range is from -25 dB to -15 dB in steps of
1 dB. Preset is to -20 dB.
Silence Detect Time
The Silence Level detect facility will only operate
after a time interval set by this control. A valid
signal is reported immediately.
Silence Detect Time
10 sec
Preset
Silence Detect Time
The range is from 1 to 60 seconds. Preset is to 10
seconds.