IQADA01
SECTION N34
IQADA01OPS 19/04/2007
www.snellwilcox.com
Version 1 Issue 1
N37.14
RollTrack (continued)
RollTrack Command
The full
RollTrack
command has two sets of
numbers
For example: 84*156
The first set (84) is the
RollTrack
command
number
The second set (156) is the value sent with the
RollTrack
command number
Disable All
When this item is checked all RollTrack items will be
disabled.
RollTrack Sending
This item shows when the unit is actively sending
the RollTrack command.
This may show:
Not Used
RollTrack destination not in use
String
A string value is always being sent.
Number
A number value is always being sent.
No
The message is not being sent.
Yes
The message is being sent.
Internal
Inconsistent behavior; please contact
Type Error your local Snell & Wilcox agent.
RollTrack Status
This item will show the status of the currently
selected RollTrack index.
This may show:
OK
RollTrack message sent and received
OK.
Unknown Rolltrack message has been sent but
it has not yet completed.
Timeout
RollTrack
message
sent
but
acknowledgement not received. This
could be because the destination unit
is not at the location specified.
Error
This indicates a broken RollCall state.
Bad
This indicates a broken RollCall
packet.
