BK-T6112 Service Manual
- 62 -
Figure appendix 10-2 Structure of buffer module
1 —Buffer rod
2 —Location cylinder
3—Fixing hole
There are two positions for installing the buffer rod on buffer module shown in Figure appendix 10-3 and
Figure appendix 10-4, and their corresponding modules are Type A buffer and Type B buffer. Change the
installing direction (indicated by the semi-circular section that the red line is in) of buffer rod through loosing
ST2.6x8 pan head self-tapping screw, and then tighten the pan head self-tapping screw. When the paper
roll passes by the buffer module, it will pass by the semi-circular section that the red line is in.
Figure appendix 10-3 Type A buffer
1 —ST2.6×8 pan head self-tapping screw 2 —Buffer rod
Figure appendix 10-4 Type B buffer
1 —ST2.6×8 pan head self-tapping screw 2 —Buffer rod
There are five positions for installing the buffer module on paper roll holder shown in Figure appendix 10-5.
