BK-T6112 Service Manual
- 12 -
Figure
Description
2.
Disassemble the two ST2.6x6 flat
self-tapping screws on both side of printer
with cross screw driver, and take off the
paper guide's cover module.
①
—ST2.6×6 flat self-tapping screw
②
—Paper guide's cover module
③
—Mark sensor adjusting thumbwheel
④
—Mark sensor socket
Note:
Be careful to keep the mark sensor
thumbwheel to avoid its missing.
When taking off the paper guide's cover
module, pull the plug of mark sensor cable
out of corresponding socket, and ensure
that the socket and the plug are not
damaged.
3.1.3 Disassemble the print motor module
Figure
Description
1.
Follow "3.1.2 Disassemble the paper
guide's cover module", disassemble the
paper guide's cover module.
2.
Disassemble the two M3x6 pan head
screws with cross screw driver, and
take off the two
Φ
3 spring washers and
the print motor module.
①
—M3×6 pan head screw
②
—
Φ
3 spring washer
③
—Print motor module
④
—Print motor socket
Note:
When taking off the print motor
module, pull out the plug of motor
cable out of corresponding socket, and
ensure that the socket and the plug are
not damaged.
