BK-T6112 Service Manual
- 29 -
4.6 Motor replacement
Tools: Cross screw driver, nipper plier.
4.6.1 Presenter motor replacement
Figure
Description
1.
Refer to "3.1.5 Disassemble the Presenter
module", disassemble the Presenter module.
2.
Take off the worm gear.
Pull the connector of retraction sensor and
Presenter motor out of corresponding
socket, and ensure that the socket and the
connector are not damaged.
①
—Worm gear
②
—Socket of retraction sensor
③
—Socket of Presenter motor
3.
Disassemble the three ST2.6x6 pan head
self-tapping screws with cross screw driver
and take off the Presenter lower path 2
module.
①
—ST2.6×6 pan head self-tapping screw
②
—Presenter lower path 2 module
2.
Disassemble the two M2x4 pan head screws
with cross screw driver and take off the
Presenter motor.
①
—M2×4 pan head screw
②
—Presenter motor
4.6.2 Print motor replacement
Figure
Description
1.
Refer to "3.1.3 Disassemble the print motor
module", disassemble the print motor
module.
2.
Disassemble the two M3x6 pan head screws
with cross screw driver and take off the print
motor.
①
—M3×6 pan head screw
②
—Print motor
