background image

10  

Safety Decals

All  DANGER,  WARNING,  CAUTION  and instructional 

messages on your rider and mower should be carefully 

read and obeyed. Personal bodily injury can result when 

these instructions are not followed. The information is for 

your safety and it is important! The safety decals below 

are on your rider and mower.

If any of these decals are lost or damaged, replace them 

at once. See an authorized dealer for replacements.
These labels are easily applied and will act as a constant 

visual reminder to you, and others who may use the 

equipment, to follow the safety instructions necessary for 

safe, effective operation.

Decal - Danger, Rotating Parts, 

540 PTO Models

Part No. 1725618

Decal - Transmission 

Release

Part No. 1725776

Decal - attachment 

lift Control

Part No. 1725603

Decal - Ignition 

Switch Positions

Part No. 1722806

Decal - Throttle 

Positions

Part No. 

1725571

Decal - PTO Selector 

Positions

Part No. 1725574

Decal -  Operating Instructions, CE 

Models, Part No. 1723175

1723175

Decal - Danger, 

Rotating Blades 

Part No. 1720389

Decal - Cutting 

Height

Part No. 1717583

Decal - Cutting 

Height

Part No. 1721197

1725571

1725574

Decal - Danger, Rotating Fan, 

CE, Diesel Models

Part No. 1726086

1726086

.75"

5.25

.125" Radius

Same Die as 1726045

1725603

FLOAT

LOWER

RAISE

ANGLE

LEFT

ANGLE

RIGHT

1725618

1725776

Not 

for  

Reproduction

Summary of Contents for GT600 Series


































Reviews: