background image

GENERal OPERaTION

 1.  Read, understand, and follow all instructions in the man-

ual and on the unit before starting.

 2.  Do not put hands or feet near rotating parts or under 

the machine. Keep clear of the discharge opening at all 

times.

 3.  Only allow responsible adults, who are familiar with the 

instructions, to operate the unit (local regulations can 

restrict operator age).

 4.  Clear the area of objects such as rocks, toys, wire, etc., 

which could be picked up and thrown by the blade(s).

 5.  Be sure the area is clear of other people before mowing. 

Stop the unit if anyone enters the area.

 6.  Never carry passengers.

 7.  Do not mow in reverse unless absolutely necessary. 

Always look down and behind before and while travelling 

in reverse.

 8.  Never direct discharge material toward anyone.  Avoid 

discharging material against a wall or obstruction.  

Material may ricochet back toward the operator.  Stop the 

blade(s) when crossing gravel surfaces.

 9.  Do not operate the machine without the entire grass 

catcher, discharge guard (deflector), or other safety 

devices in place.

 10. Slow down before turning.

 11. Never leave a running unit unattended. Always dis-

engage the PTO, set parking brake, stop engine, and 

remove keys before dismounting.

 12. Disengage blades (PTO) when not mowing.  Shut off 

engine and wait for all parts to come to a complete stop 

before cleaning the machine, removing the grass catch-

er, or unclogging the discharge guard.

 13. Operate the machine only in daylight or good artificial 

light.

 14. Do not operate the unit while under the influence of alco-

hol or drugs.

 15. Watch for traffic when operating near or crossing road-

ways.

 16. Use extra care when loading or unloading the unit into a 

trailer or truck.

 17. Always wear eye protection when operating this unit.

 18. Data indicates that operators, age 60 years and above, 

are involved in a large percentage of power equipment-

related injuries.  These operators should evaluate their 

ability to operate the equipment safely enough to protect 

themselves and others from injury.

 19. Follow the manufacturer’s recommendations for wheel 

weights or counterweights.

 20. Keep in mind the operator is responsible for accidents 

occurring to other people or property.

 21. All drivers should seek and obtain professional and prac-

tical instruction.

 22. Always wear substantial footwear and trousers.  Never 

operate when barefoot or wearing sandals.

 23. Before using, always visually check that the blades and 

blade hardware are present, intact, and secure.  Replace 

worn or damaged parts.

 24. Disengage attachments before: refueling, removing an 

attachment, making adjustments (unless the adjustment 

can be made from the operator’s position).

 25. When the machine is parked, stored, or left unattended, 

lower the cutting means unless a positive mechanical 

lock is used.

 26. Before leaving the operator’s position for any reason, 

engage the parking brake (if equipped), disengage the 

PTO, stop the engine, and remove the key.

 27. To reduce fire hazard, keep the unit free of grass, leaves, 

& excess oil.  Do not stop or park over dry leaves, grass, 

or combustible materials.

 

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control    

of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.   

 

This mowing deck is capable of amputating hands and feet and throwing objects.

    

 

The triangle in text signifies important cautions or warnings which must be followed.

TRaNSPORTING aND STORaGE

 1.  When transporting the unit on an open trailer, make sure 

it is facing forward, in the direction of travel.  If the unit is 

facing backwards, wind lift could damage the unit.  

 2.  Always observe safe refueling and fuel handling practic-

es when refueling the unit after transportation or storage.

 3.  Never store the unit (with fuel) in an enclosed poorly 

ventilated structure. Fuel vapors can travel to an ignition 

source (such as a furnace, water heater, etc.) and cause 

an explosion. Fuel vapor is also toxic to humans and ani-

mals.

 4.  Always follow the engine manual instructions for   stor-

age preparations before storing the unit for both short 

and long term periods.

 5.  Always follow the engine manual instructions for proper 

start-up procedures when returning the unit to service.

 6.  Never store the unit or fuel container inside where there 

is an open flame or pilot light, such as in a water heater. 

Allow unit to cool before storing.

 7

en

Not 

for  

Reproduction

Summary of Contents for GT600 Series


































Reviews: