Transmission Oil level Check Plug
Transmission oil check plug/dipstick is used to check
transmission oil level and to add oil to the transmission.
See TRANSMISSION MAINTENANCE for oil level check
and fill procedures.
Mid / Rear PTO Selector
The mid / rear PTO selector lever selects which PTO or
combination of PTOs is activated by the PTO switch. The
selector has three positions (from front to back:) mid PTO
active only, mid and rear PTO active, rear PTO active
only. Disengage the PTO switch before altering this con-
trol’s setting.
Front / Rear Hydraulics Selector
The front / rear hydraulics selector switches which
hydraulic circuit is controlled by the forward and back-
ward movement of the attachment lift lever.
When the switch is in the forward position, the attachment
lift control lever affects attachments connected to the two
front left quick couplers. When the switch is in the rear
position the attachment lift control affects the tractor’s
hydraulic cylinder.
12V
Power Outlet
The power outlet is 12V-DC. Accessory must be rated at
14 amps or less.
Differential lock Pedal
Depressing this pedal locks the transmission differential,
locking both rear wheels into “drive”.
Use this feature if the tractor is stuck because one wheel
is slipping.
Engage the differential lock at slow
ground speeds only.
PTO Switch
The PTO (Power Take-Off) switch, in conjunction with the
mid / rear PTO selector, engages and disengages attach-
ments connected to the tractor’s mid or rear PTO shafts.
To engage the PTO, pull UP on the switch. Push DOWN
to disengage. Be sure to check the position of the mid /
rear PTO selector lever before engaging the PTO. DO
NOT engage a PTO that is not connected to an attach-
ment as the rotating shaft is a safety hazard.
Note that
the operator must be seated firmly in the tractor seat for
the PTO to function.
Reverse Mowing Option (RMO)
The Reverse Mowing Option allows for mowing (or use of
other PTO driven attachments) while traveling in reverse.
If you choose to mow or operate another attachment in
reverse, turn the RMO key after the PTO is engaged. The
L.E.D. light will illuminate, and the operator can then mow
in reverse. Each time the PTO is disengaged the RMO
needs to be reactivated if desired.
14
Not
for
Reproduction
