Snapper 2811523BV (7084940), Safety Instructions & Operator'S Manual

Page: 13 / 40

11
Operation
Stopping - Engine, Wheel Drive,
Blade (Continued)
Park Brake
1. To set the park brake, press the clutch/brake pedal (A,
Figure 16) all the way down, slide the park brake latch
(B) all the way in to the engaged position, and release
the clutch/brake pedal. A detent in the park brake latch
will keep the park brake engaged.
2. Release the park brake by pressing down firmly on the
clutch/brake pedal (A, Figure 17) . The park brake latch
(B) is spring-loaded, and will slide back to the disen-
gaged position unassisted.
Cutting Height Adjustment
1. Adjust the cutting height by raising or lowering the deck
lift lever (A, Figure 18) into the desired height of cut
notch (B) .
Operation (Continued)
WARNING
DO NOT park the machine on slopes.
!
!
Figure 17: Releasing the park brake
A
Figure 18: Cutting height adjustment
A
B
Figure 16: Setting the park brake
A
B
B